REPLACEMENT OF THE FILM POCKET SUCKER BAR MOTOR M15.
1
.
Switch off the ML2000 (ML2000 P).
2
.
Take off the PANELS.
3
.
Take out the FILM CHUTE.
4
.
Cut the WIRE TIE and unplug the FILM POCKET MOTOR.
5
.
Take out the 4 MOUNTING SCREWS.
6
.
Install the new FILM POCKET MOTOR.
NOTE
Use the DOWEL PIN and the GEAR from the old MOTOR.
FUNCTION TEST.
1
.
Take out all MAGAZINES.
2
.
Check that the FILM POCKET SUCKER BAR ARM moves forward and backward.
Start the SERVICE PROGRAM
Select SERVICE MODE from the GLOBAL MENU ......................... press ENTER
ENTER SERVICE MODE MESSAGE is displayed ............................ press ENTER
UNIT DATA are displayed ..................................................................... press ENTER
Select COMPONENT TEST ................................................................... press ENTER
Select MAGAZINE MOTORS ............................................................... press ENTER
Select FILM PICK UP MAGAZINE M15 ............................................ press ENTER
Select forward and backward
MOTOR M15
DOWEL PIN
figure 2-17
SM 3477
REPLACEMENTS
KODAK AG, Stuttgart
2-21
6/97
