Select FILM PICK UP MAGAZINE M15 ........................................... press ENTER
Select FORWARD
69.
If this distance is not correct, proceed with step 70 else proceed with step 74.
70.
Rotate out the FILM POCKET SUCKER BAR.
Select BACKWARD
71.
Loosen the MOUNTING SCREWS of the MAGAZINE LEVEL BRACKET and move it
up or down as required. Then fasten the MOUNTING SCREWS. See the drawing on the
next page
.
NOTE
The gap given in figure 3-34 has to be correct. The distances given for the MAGAZINE LEVEL
ADJUSTMENT are just a starting point.
72.
Do a SCAN RUN.
Press BACKSPACE 3 times
Select LEAVE COMPONENT TEST .................................................... press ENTER
Select CHANGE ML2000 (ML2000 P) DATA ................................... press ENTER
Select CHANGE PARAMETER ............................................................. press ENTER
Select SCAN RUN .................................................................................... press ENTER
Select NEARLY EMPTY ......................................................................... press ENTER
Select STORE PARAMETERS ............................................................... press ENTER
Select RETURN TO MAIN MENU ...................................................... press ENTER
Select COMPONENT TEST ................................................................... press ENTER
Select MAGAZINE MOTORS ............................................................... press ENTER
73.
Proceed with step 75.
74.
Rotate out the FILM POCKET SUCKER BAR.
Select BACKWARD press ENTER
75.
Press Backspace to go back to the screen TEST MAGAZINE MOTORS.
76.
Insert the MAGAZINE into position 1.
0-1 mm
travel of BLOW PIPES
MAGAZINE WALL
BLOW PIPE
figure 3-34
ADJUSTMENTS
SM 3477
6/97
3-30
KODAK AG, Stuttgart
