3-44
A-61580 November 2007
Device - OCP tab
The OCP tab is used to setup options on the scanner’s Operator
Control Panel (i.e., touchscreen).
Function Keys
— available functions for each key are:
• (
none
)
•
Stop Scanning
: scanning will stop and control will return to the
scanning application (i.e., ends the job). Restart the scan session
from the scanning application.
•
End Batch
: start a new batch by resetting the batch count (i.e. How
Many to Count) and continue to scan.
•
Omit Multifeed
: turn off multifeed detection only on the next
document that is fed.
•
Omit Print
: turn off printing only on the next document that is fed.
•
Omit Patch
: turn off patch recognition only on the next document that
is fed.
•
Lower Elevator
: moves the elevator to the lowest position.
NOTE: The
End Batch
and
Omit Patch
options are only available
when the scanner is in Image Address mode.
