Kodak i1800 Series Image Processing Manual Download Page 39

Page: 39 / 104

A-61580 November 2007

3-11

Compression

— allows you to reduce your electronic image size.

•

Type

: the scanner will produce a color version of your document.

(none)

: no compression, which may produce a large image size.

Group-4:

uses CCITT standard to compress the image, often

used in conjunction with TIFF files.

NOTE: This option is only available for

Scan as: Black and White

(1-bit).

JPEG:

uses JPEG techniques to compress the image.

NOTE: This option is only available for

Scan as: Black and White

(1-bit).

(none) - Internal on

: the scanner will compress the image,

however, an uncompressed image will be returned to the
scanning application.

•

Quality

— allows you to select the quality of the compressed JPEG

image.

Draft:

maximum compression which produces the smallest

image size.

Good

: a fair amount of compression but still produces acceptable

image quality.

Better

: some compression which produces decent image quality.

Best

: minimal compression which produces very good image

quality.

Superior

: the least amount of compression which produces the

largest image size.

Summary of Contents for i1800 Series









































































































Search results

Summary of Contents for i1800 Series

Reviews:

Related manuals for i1800 Series

Brands by name

Popular brands

Kodak i1800 Series, Image Processing Manual

Search results

Summary of Contents for i1800 Series

Reviews:

Related manuals for i1800 Series

Brands by name

Popular brands