Kodak i1800 Series Image Processing Manual Download Page 42

Page: 42 / 104

3-14

A-61580 November 2007

Post scan rotation

— allows you to select any rotation to be applied to

the electronic image after it has been scanned.

• (none)

•

Automatic

— the scanner will analyze each document to determine

how it was fed and will rotate the image to the proper orientation.

NOTES:

- There must be a sufficient amount of text on the page for this

option to work properly.

- This option is designed to work best with Latin-based characters

(e.g., English, Dutch, French, German, Italian, Spanish).

•

90, 180, 270 degrees:

the amount of rotation.

The following example shows how these settings effect a document
that was fed landscape.

Landscape

Feed Orientation

90 degrees

180 degrees

270 degrees

Summary of Contents for i1800 Series









































































































Search results

Summary of Contents for i1800 Series

Reviews:

Related manuals for i1800 Series

Brands by name

Popular brands

Kodak i1800 Series, Image Processing Manual

Search results

Summary of Contents for i1800 Series

Reviews:

Related manuals for i1800 Series

Brands by name

Popular brands