Kodak i1800 Series Image Processing Manual Download Page 4

Page: 4 / 104

A-61580 November 2007

1-3

Another example of a simultaneous output where all four images are
returned to the host would create the following four files:

•

Front grayscale

: FG.jpg. This image file represents the contents of

the front side of the document using 8-bits per pixel.

•

Front black and white:

FB.tif. This image file represents the

contents of the front side of the document using 1-bit per pixel.

•

Back grayscale

: BG.jpg. This image file represents the contents of

the rear side of the document using 8-bits per pixel.

•

Back black and white

: BB.tif. This image file represents the

contents of the rear side of the document using 1-bit per pixel.

NOTE: Actual file formats are determined by the host application.
These image files can be controlled through the application
independently.

FG.jpg

(front grayscale)

FB.tif

(front black and white)

BG.jpg

(back grayscale)

BB.tif

(back black and white)

Summary of Contents for i1800 Series









































































































Search results

Summary of Contents for i1800 Series

Reviews:

Related manuals for i1800 Series

Brands by name

Popular brands

Kodak i1800 Series, Image Processing Manual

Search results

Summary of Contents for i1800 Series

Reviews:

Related manuals for i1800 Series

Brands by name

Popular brands