background image

A-61580   November 2007

2-11

Two level indexing

When using two level indexing, the image address assigned to each 
document is defined as follows:

• Field D (Level 1) defined as having a field length greater than 0.

• Field C (Level 2) defined as having a field length greater than 0.

For example, if you scan a book with 2 chapters (Chapter 1 has 40 
pages and Chapter 2 has 60 pages) and the image address has 
been defined as:

• Field D has 3 characters

• Field C has 2 characters

• Field B has 0 characters

• Field A has 0 characters

The header page for Chapter 1 is assigned image address 01.000. The 
first page of Chapter 1 is assigned image address 01.001; the second 
page is assigned image address 01.002, and so on through Chapter 1.

The header page for Chapter 2 is assigned image address 02.000. The 
first page of Chapter 2 is assigned image address 02.001; the second 
page is assigned image address 02.002, and so on through Chapter 2. 

Any one of the pages may later be located and retrieved using its 
unique image address.

Chapter 1
Header

Page 1-1

Page 1-2

Page…

Page 1-40

Chapter 2
Header

Page 2-1

Page 2-2

Page…

Page 2-60

Image Address 01.000

Image Address 01.001

Image Address 01.002

Image Address 01.040

Image Address 02.000

Image Address 02.001

Image Address 02.002

Image Address 02.060

Summary of Contents for i1800 Series









































































































Reviews: