3-26
A-61580 November 2007
Creating multiple images
for each side of a
document
In this example, let’s assume you want to configure a scan session that
has documents with information on both sides and you want the
scanner to produce both a color and a black and white image for each
side of each document.
1. Select a
Setting Shortcut
from the main
Kodak
Scanner window
that closely describes your desired output.
2. Select
Settings
to display the Image Settings window.
3. Select the
Advanced Image Setup
icon on the Image Settings
window to display the Advanced tab.
4. Select
Input document is: Two Sided
.
5. Select
Images per side: Multiple
.
NOTE: The
Images to Configure
area will now be displayed on the
Advanced tab and will contain a color image item and a
black and white image item.
6. If you want a grayscale image instead of a color image, when
enough color is detected in the document:
• make sure
Color (24-bit)
is selected
• select
Change
to display a list of options
• select
Grayscale
7. By default the scanner will produce the color/grayscale image first
and deliver it to the scanning application, then it will produce and
deliver the black and white image. If you want the black and white
image to be produced and delivered first:
• make sure
Black and White (1-bit)
is selected
• select
Move up
to place the black and white image first in the list
