Kodak AFi 10, User Manual

Page: 175 / 230

Setting your camera to save power (sleep mode)
Set your camera system to enter sleep mode when it is not in use. In sleep mode, your camera uses less
power.
1. Push the options button, and use the rear dial to select POWER SAVE .
2. Use the front dial to select the amount of time that the camera system is inactive until it enters sleep
mode.
If you do not want the camera system to enter sleep mode at any time, select Off .
Note: When the camera system enters sleep mode, it overrides the setting for the duration of imaging
module backlight.
The camera system, including the imaging module, enters sleep mode after the designated period of
inactivity.
Note: When using a split supply solution, the imaging module does not enter sleep mode with the
camera. When the camera enters sleep mode, manually turn off the imaging module by pushing the
imaging module power button.
175
Setting your camera to save power (sleep mode)