Kodak AFi 10 User Manual Download Page 208

Page: 208 / 230

Unable to change the exposure time and aperture settings

When using a non-AFD lens, the exposure time and aperture settings are not adjusted on the handgrip
display when you move the front dial.

The lens aperture ring must be set to A.

Turn and lock the lens aperture ring to A.

You can now change the settings using the front dial.

Handgrip and viewfinder displays are not illuminated

The display's backlight is turned off.

Set the

LCD BACKLIGHT

AUTO

The handgrip and viewfinder displays are lit.

Overexposed shots

Shots are overexposed when using autoexposure.

Extraneous light falling on the viewfinder is affecting your shots.

Keep extraneous light off the viewfinder when exposing your shot.

If necessary, use EV compensation.

Your shots are properly exposed.

208

Troubleshooting

Summary of Contents for AFi 10







































































































































































































































Search results

Summary of Contents for AFi 10

Reviews:

Related manuals for AFi 10

Brands by name

Popular brands

Kodak AFi 10, User Manual

Search results

Summary of Contents for AFi 10

Reviews:

Related manuals for AFi 10

Brands by name

Popular brands