Kodak AFi 10, User Manual

Page: 193 / 230

Important: To prevent contamination of the sensor, do not remove the protective IR filter glass. The
protective IR filter glass can be replaced only by Leaf dealers or by the Leaf Service Center. If you remove
the IR filter glass, the warranty on the Leaf AF
i camera system is void.
Important: Do not touch the IR filter glass. Any contamination of the IR filter glass (such as dust or
fingerprints) will appear in images that you capture.
Important: Put the protective cover over the IR filter glass whenever the imaging module is not attached
to the camera.
Cleaning the IR filter glass
In the event that the IR filter glass needs to be cleaned, follow the cleaning procedure with care.
What you will need:
●
Cleaning wipe, supplied with the Leaf AF i camera system
●
Cleaning fluid (isopropyl alcohol)
● Clean compressed air
Note: You can order additional cleaning wipes from your local Leaf dealer.
Important: Never clean the filter glass with a dry cloth.
Important: Never clean the protective IR filter glass with window or lens cleaner. The residues from these
products may permanently cloud the IR glass filter.
1. Remove the imaging module from the camera body using the back release.
Important: When the imaging module is detached from the camera, avoid touching the auxiliary
shutter.
2. Briefly spray the ionized nitrogen away from the IR filter glass to remove any condensation that may
be inside the sprayer nozzle.
Note: Keep the spray canister vertical while you spray.
193
Cleaning the IR filter glass