Calibration Utility for MACINTOSH
2–9
Part No. 1H9659 September 1997
Easy Cal Step 3
The Easy Cal Step 3 dialog box allows you to specify a different printer
media to calibrate than the one that appears in the
Printer Setup box.
1. Make sure that the paper and media types for which you want to
calibrate are loaded in the printer.
NOTE: If you do not need to specify a different printer media, you can
ignore the following steps and click on the
Next>> button in
the Easy Cal Step 3 dialog box and go to “Easy Cal Step 4.”
2. Click on the
Change Setup... button.
The Printer Setup for Calibration dialog box appears.
NOTE: Your Printer Setup for Calibration dialog box may appear different,
depending on your printer export module.