66
A-61560 January 2007
•
Custom
: allows you to manually adjust the
Color amount
and/or
Color threshold.
NOTE: When setting Sensitivity values, it is suggested that you start
with the
Medium
option and scan a typical job set. If too
many documents were returned as color/grayscale vs. black
and white, then change to the
High
option and re-run the job.
If too few documents were returned as color/grayscale vs.
black and white, then change to the
Low
option and re-run
the job. If none of these options provide the desired result,
select
Custom
to manually adjust Color Amount and/or Color
Threshold.
Custom
also allows access to the
Learn
mode
which provides a method for the scanner to analyze
documents and recommend settings.
Color amount
— the amount of color that needs to be present in a
document before it will be saved as either color/grayscale. As the value
of
Color Amount
increases, more color pixels are required. Valid values
are
1
to
200
.
Color threshold
— the color threshold or saturation (i.e., pale blue vs.
dark blue) at which a given color will be included in the color amount
calculation. A higher value indicates that a more intense color is
required. Valid values are
0
to
100
.
Learn
— allows you to calculate your settings based on representative
color documents scanned. Before selecting
Learn
, place at least 5
representative color documents in the input tray. The documents will be
scanned and analyzed to determine the recommended
Color amount
.
These Color amount and Color threshold sliders will be updated
automatically. If these values do not provide the desired results with
your job set, you may need to manually adjust the
Color Threshold
.
