A-61560 January 2007
7
System requirements
Following is the minimum recommended system configuration to run
Kodak
i1200/i1300 Series Scanners.
• Recommended PC configuration:
- For documents up to 356 mm (14 in.) long up to 400 dpi: Pentium
IV, 3.2 GHz processor, 512 MB RAM
- For documents up to 660 mm (26 in.) long up to 400 dpi: Pentium
IV, 3.2 GHz processor, 1 GB RAM
- For longer documents/higher resolutions: Pentium IV, 3.2 GHz
processor, 3 GB RAM
• USB port 2.0 (compatible with USB 1.1 but at slower speeds)
• Microsoft Windows XP SP2, (supports USB 2.0); Windows XP 64-bit
edition and Windows 2000 Professional (supports USB 2.0)
• 100 MB free hard disk space
• CD-ROM drive
Installing the scanner
Install the scanner in the following order:
1. Install the
Kodak
Driver Software on the PC.
2. Connect the power cord to the scanner.
3. Connect the USB cable between your scanner and PC.
4. Attach the output tray.
5. Turn on scanner power and finalize the
Kodak
Driver Software
installation.
6. Verify your scanner installation (see Chapter 3).
7. Install other supplied scanning applications (See Chapter 3).
Installing the
Kodak
Driver Software
Install the driver software
before
connecting the scanner to your PC.
1. Insert the installation CD in the CD-ROM drive. The installation
program starts automatically.
NOTES:
• If the CD does not start automatically, open the My Computer
icon on your desktop. Double-click the icon for your CD-ROM
drive, then double-click on
Setup.exe.
• The i1200 and i1300 Series Scanners have separate installation
CDs. If you have both scanners in your environment, be sure to
use the correct installation CD.
2. Select
Install Scanner Software.