Knight D Series Manual Download Page 107 | Manualshive

Page: 107 / 138

background image

KNIGHT D-SERIES SERVO HOIST OPERATION MANUAL

SECTION 6

PARAMETER DESCRIPTIONS

103

bSTS:118 – M3-DI-6

Variable Units: Boolean (0=Off, 1=On)
Description: This parameter displays a ‘1’ if the servo drive’s module #3’s digital output #6 is ON.
KSS Workspace tree location: Knight WO# \ Status \ I/O Status.

bSTS:119 – M3-DO-7 Motor Brake Released

Variable Units: Boolean (0=Off, 1=On)
Description: This parameter displays a ‘1’ if the servo drive’s module #3’s digital output #7 is ON.
KSS Workspace tree location: Knight WO# \ Status \ I/O Status.

bSTS:120 through bSTS:127 – Spare

C. iPRM Parameter Array

This parameter array lists the Integer Parameter variables of the Servo Hoist that are made available to the
Knight Servo Studio (KSS).

The parameters listed in the iPRM array are integer values being sent from the Knight Servo Studio to the
hoist and are displayed at:
KSS Workspace tree location: Knight WO# \ Parameters \ iPRM.

iPRM:0 – Slow Zone Mode

Variable Units: Choice (0=off, 1=down, 2=up, 3=up and down)
Description: This parameter configures the hoist’s automatic slow zone.

This parameter works with the variables fPRM:52 to fPRM:59 to configure the automatic slow zone.

0 = Slow Zone feature is disabled.
1 = Program will automatically decrease the speed of the hoist only when moving down.
2 = Program will automatically decrease the speed of the hoist only when moving up.
3 = Program will automatically decrease the speed of the hoist when moving up or down.

KSS Workspace tree location: Knight WO# \ Hoist Configuration \ Slow Zone \ Row 1.

NOTE: If using this function, all parameters (fPRM:52 to fPRM:59) must be non-zero for the Slow Zone to

function correctly.

iPRM:1 through

iPRM:7 – Spare

D. iSTS Parameter Array

This parameter array lists the Integer Status variables of the Servo Hoist that are made available to the
Knight Servo Studio (KSS).

The parameters listed in the iSTS array are integer values being sent from the hoist to the Knight Servo

Studio and are displayed at:

KSS Workspace tree location: Knight WO# \ Parameters \ iSTS.

iSTS:0 – Drive Warning ID

Variable Units: Software Warning Code
Description: This parameter displays any warning codes that the system is currently experiencing.

Please see section 5.F. ‘Accessing the Servo Hoist’s Fault Log’ for instructions on how to access the
servo’s fault history.

KSS Workspace tree location: Knight WO# \ Status \ Alarms/Warnings \ Row 4.

iSTS:1 – Drive Alarm ID

Variable Units: Software Alarm Code
Description: This parameter displays any fault codes that the system is currently experiencing. See section

5.F. ‘Accessing the Servo Hoist’s Fault Log’ for instructions on how to access the servo’s fault history.

KSS Workspace tree location: Status \ Alarms/Warnings \ Row 1.

«
...
105
106
107
108
109
...
»

Summary of Contents for D Series











































































































































Reviews:

No comments

Related manuals for D Series

Brand: Westfalia Pages: 22

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands