99
Measurement
Display
Remark
or AM/PM and °F:
From the configuration or calibration menus,
you can switch the device to measuring
mode by pressing the
meas
key.
In the measuring mode the upper display
line shows the configured process variable
(Cond or temperature), the lower display line
shows the time and the second configured
process variable (Cond or temperature). The
[meas] mode indicator lights and the active
parameter set (A/B) is indicated. A/B is not
displayed with parameter set “Fix A”.
By pressing the
meas
key you can step through the following dis-
plays. When no key has been pressed for 60 sec, the device returns to
the standard display.
1) Selecting the parameter set
(if set to “manual“ in the configuration).
Select the desired parameter set using
the
arrow keys (PARSET A or PARSET B
blinks in the lower display line).
Press
enter
to confirm.
Further displays
(each with
meas
).
2) Display of measuring point (“TAG“)
3) Display of time and date
4) Display of output current(s)
Summary of Contents for Stratos Pro A201COND
Page 90: ...90 ...
Page 143: ...143 Index ...
