Knick Stratos Pro A201COND User Manual Download Page 34

Page: 34 / 144

Color-Coded User Interface

The color-coded user interface* guarantees increased operating

safety. Operating modes are clearly signaled.

The normal measuring mode is white. Information text appears on a

green screen and the diagnostic menu appears on turquoise.

The orange HOLD mode (e.g. during calibration) is quickly visible as is

the magenta screen which indicates asset management messages for

predictive diagnostics – such as maintenance request, pre-alarm and

sensor wear.

The alarm status has a particularly noticeable red display color and is

also signaled by flashing display values. Invalid inputs or false pass-

codes cause the entire display to blink red so that operating errors are

noticeably reduced.

White:

Measuring mode

Orange:

HOLD mode

Red blinking:

Alarm, errors

Magenta:

Maintenance request

Green:

Information texts

Turquoise:

Diagnostics

* can be turned off

Summary of Contents for Stratos Pro A201COND

















































































































































Search results

Summary of Contents for Stratos Pro A201COND

Reviews:

Brands by name

Popular brands

Knick Stratos Pro A201COND, User Manual

Search results

Summary of Contents for Stratos Pro A201COND

Reviews:

Brands by name

Popular brands