43
Configuration
Configuration
Choices
Default
SENSOR
SNS:
2‑ELECTRODE
4‑ELECTRODE
MEMOSENS
2‑ELECTRODE
2‑EL / 4‑EL
CELLFACTOR
1)
00.0000 ‑
19.9999 c
01.0000 c
MEAS MODE
Cond
Conc %
Sal ‰
USP μS/cm
Cond
Cond
MEAS RANGE
2)
x.xxx μS/cm
xx.xx μS/cm
xxx.x μS/cm
xxxx μS/cm
x.xxx mS/cm
xx.xx mS/cm
xxx.x mS/cm
x.xxx S/m
xx.xx S/m
xx.xx MΩ
xxx.x mS/cm
Conc
Solution
‑01‑ (NaCl)
‑02‑ (HCl)
‑03‑ (NaOH)
‑04‑ (H2SO4)
‑05‑ (HNO3)
‑06‑ (H2SO4)
‑07‑ (HCl)
‑08‑ (HNO3)
‑09‑ (H2SO4)
‑10‑ (NaOH)
‑U1‑
‑01‑ (NaCl)
Configuration
1) With Memosens, the cell constant is automatically loaded from the sensor. When
switching from Memosens to 2‑/4‑electrode sensor, the cell constant is set to the
default value 01.0000 c and then must be entered manually.
2) The range selection allows selecting the maximum resolution. If the upper limit
of this range is exceeded, the device automatically switches to the next higher
range.
Summary of Contents for Stratos Pro A201COND
Page 90: ...90 ...
Page 143: ...143 Index ...
