132
Sensoface
(Sensocheck must have been activated during configuration.)
The smiley in the display (Sensoface) alerts to sensor problems
(defective sensor, sensor wear, defective cable, maintenance
request). The permitted calibration ranges and the conditions
for a friendly, neutral or sad Sensoface are summarized in the
following table. Additional icons refer to the error cause.
Sensocheck
Continuously monitors the sensor polarization and the sensor
cable capacitance. Critical values make the Sensoface “sad” and the
corresponding icon blinks:
The Sensocheck message is also output as error message Err 15.
The display backlighting turns red, output current 1 is set to 22 mA
(when configured correspondingly).
Sensocheck can be switched off during configuration (then Sensoface
is also disabled).
Exception:
After a calibration a smiley is always displayed for confirmation.
Note:
The worsening of a Sensoface criterion leads to the devaluation of the
Sensoface indicator (Smiley becomes “sad”). An improvement of the
Sensoface indicator can only take place after calibration or removal of
the sensor defect.
Summary of Contents for Stratos Pro A201COND
Page 90: ...90 ...
Page 143: ...143 Index ...
