Knick Stratos Evo A402, User Manual

Page: 44 / 196

44
Operation
Measuring Mode
Prerequisite: A Memosens sensor is connected or a measuring module is installed
with a corresponding analog sensor connected.
After the operating voltage has been connected, the analyzer automatically goes to
“Measuring“ mode. To call the measuring mode from another operating mode (e.g.,
Diagnostics, Service): Hold meas key depressed (> 2 s).
Depending on the configuration, you can set various displays as standard display for
the measuring mode (see page 47).
Note: By pressing the meas key in measuring mode you can view the displays for
approx. 60 sec.
NOTICE:
You must configure the analyzer for the respective measurement task.
Time
(or flow)
Active parameter set
(configuration)
enter key
Display indicates
OUT1:
e.g., measured
value
Display indicates
OUT2:
e.g., temperature
Sensoface indicator
(sensor status)
Mode indicator
(measuring)
Hold meas key
depressed for calling
the measuring mode
(hitting the key once
more switches the
display)