Glossary
Glossary
Automatic
switch-off
(AutOFF)
To protect the batteries, the meter switches off automati-
cally when not operated for a longer period. Switch-off
can take place after either one hour or twelve hours.
When data logger or remote interface are active, the auto
switch-off feature is disabled.
cal
Key for activating calibration.
Calibration
Adjustment of the conductivity meter to the cell constant
of the sensor used.
Calibration
solution
Solution with exactly defined conductivity for calibrating a
conductivity meter.
Data logger
The data logger records up to 100 measured values
together with the temperature, date and time in the data
memory. Recording takes place either interval or event-
controlled (measured-value difference) or manually at the
push of a button.
Data
memory
Up to 100 measured values can be stored in the data
memory together with the temperature, time and date.
Evaporation
residue
See TDS.
GLP
Good Laboratory Practice: Rules for conducting and docu-
menting measurements in the laboratory.
meas
Pressing this key returns to the measuring mode from all
other levels. In the Cond
measuring mode, the set tem-
perature compensation is displayed by pressing meas, in
the TDS mode, the TDS factor is displayed.
NAMUR
German committee for measurement and control stan-
dards in the chemical industry
