Operation
Data logger
Data logger
The data logger records up to 100 measured values
together with temperature, time and date. Data storage
is performed either manually (at the press of a key), inter-
val- or event-controlled. The data logger always saves the
currently measured variable.
+
Press STO to access the memory mode and then clock to
access the data logger mode.
The currently measured value is shown in the display.
Pressing STO confirms the selected mode. In the Continue
and Start mode this also starts the data logger. The current
memory location is shown in the display. If “
Clear
” has been
selected, all memory locations are cleared and the meter
returns to measuring mode.
Pressing meas ends the data logger mode.
Data logging modes
After pressing STO, logging is continued after the memory
location in which the last measured value was stored (con-
tinue). Press meas to exit logging.
After pressing STO, the entire data memory is cleared
without starting the data logger (clear).
After pressing STO, the entire data memory is cleared.
Storage begins from memory location “
00
” (start).
Press meas to exit logging.
