Standard settings for ZU 0244 Lab Printer
Operation
Printing measured values and records
Interface
cable
Only one interface cable is required to operate with a
printer or PC. By simply turning the plug around on the
meter’s interface port, the cable can be used to connect
either printer or PC. The label facing the operator should
match the output device being connected.
Printer
PC
Meter
configuration
Parameter
Setting
Baud rate
4800
Printer
On
Note
Make sure that the printer function is activated in the
configuration
(Print On)
and the set baud rate corresponds
to that of the printer.
Printing
measured
values
Press print while in the measuring mode to print out the
currently measured value. The measured value is printed
out together with the temperature, date, time and a three
digit identification number. The identification number is
reset when the meter is switched off.
Printing the
memory
Press RCL and then print to print out the stored data.
All stored measured values are printed with temperature,
date, time and memory location number. If you only want
to print individual memory locations, press RCL.
Then select the desired memory location using
▲
or
▼
.
Press print to start printing.
+
Connection assignment
