Knick 830 R, Manual

Page: 117 / 216

E-117
English
The error message is displayed alternately
with the measured value.
If no valid measured value can be deter-
mined, dashes are displayed.
If more than one error has occurred, the
message with the highest priority is dis-
played first (highest priority = 1).
Error
message Prio-
rity Error Remedy
Er.01 3 Loop current < 3.8 mA
or
loop current < 0.3 mA
Check loop current and
remedy error.
Er.02 3 Loop current > 22 mA Check loop current and
remedy error.
Er.03 2 AD converter overdrive, loop
current > approx. 24 mA
Check loop current and
remedy error.
Er.04 6 Span > 10,050 counts Adjust settings.
Er.05 5 Display ranges exceeded Adjust settings.
8 Troubleshooting
8.1
Error Message
Measuring Mode