Knick 830 R, Manual

Page: 112 / 216

E-112
• Activate parameter mode.
• Hold down the key for 2 sec.
• Select ADJ menu and confirm.
• Adjust the internal 4 mA and 20 mA
reference points to the corresponding
values of your transmitter.
The indicator provides internal high-preci-
sion 4 mA and 20 mA references to which
the start and end value of the span are
related.
If the transmitter supplies slightly different
current values for start and end of scale
(e.g., offset error of transmitter), this may
lead to deviations from the desired display.
The ADJ menu allows internal references
to be adjusted to the currents actually sup-
plied by the transmitter. This prevents, for
example, that offset errors influence the
value displayed.
ADJ Menu
• Set the transmitter to 4 mA
(start of scale).