48
8. Control system
8.3.1 Data
“Type of knife”: circular / sickle knife
“Rotation direction circular knife”: 0 = left,
1 = right
“Holder”: index as to which holder will be used
for processing the knife
“Processing speed”: processing speed at which
the cam disc rotates during the grinding process
(mm / s)
“Upwards after processing”: true = yes, false = no
(for better assembly or assembly with suspension
protection)
8.3.2 Abrasives
“Grinding wheel front”
“Grinding wheel rear”
8.3.3 Steps
“Tool”: selection of the abrasives
“Cycles”: number 1, 2, 3
“Angle Tool 1 (front)”: angle adjustment of front
grinding wheel
“Angle Tool 2 (rear)”: angle adjustment of rear
grinding wheel
“Overrun start”: distance limit switch is reached
“Raise front start”: front grinding wheel is raised,
true = yes, false = no
“Raise rear start”: rear grinding wheel is raised,
true = yes, false = no
“Overrun end”: distance limit switch is reached
“Raise front finish”: front grinding wheel is raised
from knife, true = yes, false = no
Figure 8-4
Grinding data “Data”
Figure 8-5
Grinding data “Abrasives”
Figure 8-6
Grinding data “Steps”
