62
9. Care and maintenance
For all work on the grinding machine, the locally applicable safety and
accident prevention regulations as well as instructions in the “Safety”
and “Important Notes” section of the operating instructions must be
observed.
CAUTION
9.1 Coolant
The cooling water has to be replaced every week
and the water tray must be cleaned.
The water trough must always be filled with water
up to 3 cm below the rim. The water trough can
be pulled out in front for filling and cleaning.
The pump (9-1/1) including the guard can be
removed by loosening and removing the star han-
dles (9-1/2).
9.2 Lubricate cross table
Place grease gun on the lubrication points and
lubricate the cross table.
We recommend “OEST Multi-Purpose Grease L2”
or a similar commonly available product.
Press one round of grease into the lubrication
point using the grease gun once a month.
Figure 9-1
Water tray
1
2
Figure 9-2
Lubricate cross table
