8” VARIABLE SPEED
BENCH GRINDER
INSTRUCTIONS
Part #13573
Page 1: ...8 VARIABLE SPEED BENCH GRINDER INSTRUCTIONS Part 13573 ...
Page 2: ...0 watt work lamp Bulb not included ASSEMBLY AND SET UP Remove Grinder parts bags and hardware from packaging Be careful not to discard parts bags with pack aging Attach left and right Tool Rests to lower edge of wheel guard opening with supplied knob screws washers and lock washers Fig A Locate slot over pin and adjust so that rear edge of tool rest is 1 8 from wheel surface Attach left and right ...
Page 3: ...or ALWAYS grind objects pointing slightly downward and NEVER upward as they can be violently hurled toward you causing severe injury or death Only apply a very light pressure against the wheel when grinding NEVER push an object hard against a grinding wheel Always use the tool rests for support and stabilization Only allow the object being ground to contact the wheel for several seconds at a time ...
Page 4: ...rder wheel Ground object being held too long against wheel Grind several seconds on wait several seconds re grind Wheel loading up with metal Too much pressure being applied to the wheel Reduce pressure Wheel too hard for material being ground use softer wheel Ground object being held too long against wheel Grind several seconds on wait several seconds re grind Too much heat in ground object Dip i...
