36
7. Operation
Close the safety doors.
Turn the “Setup Mode” key switch (7-14/2) to
“0” and press the “Start / Stop” button (7-14/1).
Open the coolant tap.
The machine starts the grinding process.
When the knife is in working position, press the
“Start / Stop” button (7-14/1) again to stop the
machine.
NOTICE
If you briefly press the “Start / Stop” button,
the program is interrupted and the button
flashes. The grinding program continues
when the button is pressed again.
Pressing the “Start / Stop” button for 3 sec-
onds aborts the program. The button no
longer flashes. Pressing the button again
starts the program flow once more from the
beginning.
Figure 7-14
Control panel
1
2
