KME DAP 26, User Manual

Page: 7 / 52

Switching inputs to ‚analog’ (factory preset)
K.M.E. DAP26
Presetinfo
Choose an option!‹ ›
ˆ
K.M.E. DAP26
Devicesetting
Choose an option!‹ ›
ˆ
Devicesettings
In-select: Digital
OK: Change Value ˆ>
K.M.E. DAP26
Preset Configuration
Choose an option! >
ˆ
Devicesettings
In-select: Analog
OK: Change Value ˆ>
Devicesettings
In-select: Analog
OK: Change Value ˆ>
ˆ ˆ ˆ
Follow this navigation scheme to activate the analog audio inputs (factory preset)
? after using the digital audio input sometimes ? . This is one of the few settings that
can only be done on the hardware unit itself.
Analog outputs 1-6
O U T P U T
6 4 2 5 3 1
The analog audio outputs 1-6 are electronically balanced, male XLR sockets. We do
not recommend connecting unbalanced destination devices to the DAP 26. The
nominal output level is reached if the yellow LED in the level meter lights up.
1 2
3
1 2
3
XLR-to- XLR balanced audio connection