KME DAP 26, User Manual

Page: 34 / 52

Selecting
‚Yes’ opens the ‚Save’ dialogue, selecting ‚No’ starts the transmission of
the presets from the DAP 26 to the PC. You can select the number of the preset to
change.
While you are in online mode you cannot change any settings in the DAP 26 by
hardware. The unit is locked, the display shows:
UNIT LOCKED due to
PC CONNECTION
or RESTART to unlock
DISCONNECT from PC
To make settings on the hardware unit you have to go
‘Offline’ pressing the
‘Disconnect’ button.
Clicking into the
‚Preset’ list box allows the user to load another preset into the
software plug-in by selecting one out of the list.
The selected preset will be loaded.
When you have made your changes to the preset you can save the preset in the
hardware unit by clicking the ‚store preset’ button. The software sends the preset
back to the DAP 26 and stores it in the internal memory.
When there is a communication problem between the DAP 26 and your PC the
following window will be displayed: