Laser Surgical Unit diomax
®
34
Revision 6
5.1.6
Display
The figure on the left shows the laser during
laser power setting
(item 4, highlighted in orange).
•
Use the rotary knob to select and adjust the
laser power, see section 5.1.7 “Rotary Knob
with Ring Light”, page 35.
•
By pressing the rotary knob, the laser power
adjustment is finished.
The display consists of the following display elements:
•
Name (1)
of the currently set laser
program – with the note
modified
(5)
if
laser parameters were changed
compared to the stored program.
•
Information line (2)
for information
texts or currently pending actions.
•
Program parameters (3)
– The
following parameters can be set at the
user’s choice:
—
Laser power (watts)
—
Operating mode
—
Pulse duration (seconds)
—
Pulse pause (seconds)
—
Cycle (seconds)
—
Cycle pause (milliseconds)
•
Active field (4)
– The highlighted field
(orange) shows the parameter that can
currently be modified.
•
Laser status display (6)
see section 5.1.8 “Laser Status Display”,
page 36.
•
Menu section (7)
<BACK
– This command is used to exit the
current menu level.
Last Used Programs
– Indicates the
4 last-used programs.
Programs
– Offers menus for working with
programs.
Logfile –
Menu for creating log entries.
•
Pilot laser
– Menu for setting pilot
brightness and flash frequency.
Setup
– Menu for device parameter
settings.
•
Display fields (8)
for
—
Avarage power – Indicates medium laser
output (W),
—
Number of laser pulses,
—
Duration – Indicates total treatment
time (hours, minutes and seconds),
—
Total energy – Indicates the applied
laser energy (joules).
•
Date and time (9)
The format of date and time depends on the
selected menu language.
English:
02-04-2014 1:22 pm
All other languages: 04.02.2014 13:22
