32
AURA 80, CLASS 90, AURA 120, REA 100 PELLET-BURNING STOVE
EN - Rev. 1.6
Menu
Meaning
Values that can be set
PELLET TYPE
By increasing the value by a single unit, the pellet load is increased by approximately 4%.
-9 / +9
By decreasing the value by a single unit, the pellet load is decreased by approximately 4%.
FLUE TYPE
By increasing the value by a single unit, the flue gas extraction speed (and thereby the intake of
combustion air) is increased by approximately 3%.
-9 / +9
By decreasing the value by a single unit, the flue gas extraction speed (and thereby the intake of
combustion air) is decreased by approximately 3%.
* Access by non-expert users can cause serious damage to the equipment, to things and the environment as
well as personal injuries. Klover declines any responsibility for damages arising from inappropriate calibration.
Menu 10 – Technical calibration
Allows you to access all data reserved for the Technical Assistance Centre. Access is protected by a password.
Unauthorised access can cause serious damage to the equipment, to things and the environment as well as personal
injuries.
Menu 11 – Relax function (Menu not available)
Allows for reducing the front air fan speed for a pre-set time (90 min).
Menu 12 – Set Room. Duc. (Menu displayed only on models with this function)
Allows you to access and modify the room temperature of zone 1 and zone 2 controlled by the associated fans
(see also
“
Modify ducted air speed Set values”
)
The image below shows the screen for the “SET DUCTED ROOM” menu item:
To modify the room temperature, select the
“SET DUCTED ROOM”
to be modified (
“SET ROOM 1”
or
“SET ROOM 2”
)
by pressing keys 4 (Set) or 5 (Esc).
Press keys 1 and 2 (Increase and Decrease) to adjust the value; values between 07°C and 40°C can be set.
Press key 3 (On/Off) to exit the menu, saving the set value.
INITIAL CONFIGURATIONS
Connecting the remote control
The first time the product is powered or any time you want to change the connection channel, the remote control must be
interfaced with the support panel fitted on the appliance. This should be carried out as follows:
1.
Press keys 3 (On/Off) and 4 (Set) on the remote control for several seconds.
2.
The words “MENU’ RADIO ID” will appear, along with the channel the remote control is linked to if it has already
been configured.
SET ROOM ZONE 1
(Room temperature for zone 1,
can be set at values between
07°C and 40°C)
Summary of Contents for AURA 120
