klover AURA 120, Installation, Use, Maintenance And Helpful Tips

Page: 31 / 68

26
AURA 80, CLASS 90, AURA 120, REA 100 PELLET-BURNING STOVE EN - Rev. 1.6
THE MENU
Access the Menu by pressing key 4 (Set) on the remote control.
The menu is divided into different items and levels, providing access to the programming and settings options of the
appliance.
Keys 1 and 2 (Increase and Decrease) allow you to select the menus to be modified.
Key 4 (Set) accesses the menu to be modified, storing the changes made previously.
Key 5 (Esc) returns you to the previous menu item, storing the changes made previously.
Inside the menu to be modified, use keys 1 and 2 (Increase and Decrease) to modify the value set in the selected menu.
Listed below are the menus present on the PCB, with the relevant explanations.
Menu 01 – Stand-by
If disabled, the switching off of the appliance once the “SET ROOM” temperature setting has been reached is excluded.
The operating power will however be modulated; the display will show the word “MODULATION”
If enabled the appliance will enter modulation mode and/or switch off if the temperature set in "SET ROOM" is reached.
During the modulation stage the display will show the words “OK ST-BY”; when switched off it will show “STAND-BY”.
The image below shows the screen when STAND-BY is enabled:
Menu 02 – Timer
Allows you to access the different timer programmes (daily, weekly and weekend).
In order to avoid any undesired switching on/off operations, only activate and use a single programme at a time (daily,
weekly or weekend programme).

Sub-menu 02 – 01 – Enable timer
Allows you to globally enable and disable all timer functions. For the correct operation it is recommended to enable it
using keys 1 or 2 (Increase and Decrease) when at least one on/off programme (daily, weekly or weekend programme)
is activated.
Enable field