Klein Marine Systems, Inc. HydroChart 5000, Operation And Maintenance Manual

Page: 60 / 82

4-6
CHAPTER 4 Equipment Maintenance
HydroChart 5000 Sonar Operations and Maintenance Manual P/N 11210080, Rev. 02
9. Disconnect all the cables
from the sonar electronics
housing connector end cap
and separate the transducers
from the fairings.
The sonar electronics
housing is shown with all
the cables disconnected in
Figure 4-7. The altimeter
and jumper cables should
be the only cables
remaining that are
attached to the frame,
unless an optional sound
velocity sensor is installed
for which a third cable
should be present. The
altimeter cable has a red
band attached near the
connector.
Figure 4-6:
Disconnecting the Cables from the
Sonar Electronics End Cap
Figure 4-7:
Sonar Electronics Housing with all
the Cables Disconnected
Jumper cable
Altimeter cable