38
EN
REMOTE CONTROL FUNCTIONS IN DETAIL
• The remote control is a standard remote control that can be used for various
air conditioners with different functionalities. Therefore, some of the buttons
on your appliance may not have a function assigned to them.
• After switching on the air conditioner, the appliance produces a sound and the
power indicator lights up red. You can now operate the air conditioner using
the remote control.
• Each time a button on the remote control is pressed, the signal symbol flashes
once on the display and the air conditioner emits a sound to indicate that the
signal has been transmitted.
• When the appliance is switched off, the set temperature and the clock symbol
are shown on the display of the remote control. In case an on timer, off timer
or light functions are active, the corresponding symbols are also shown on the
display. In On mode, the display shows the symbols of all active settings and
functions.
1
ON/OFF
To turn the appliance on, press the button. Press it again to
switch the appliance off.
2
MODE
Press the button several times in succession to access the
individual modes in the following order: AUTO > COOL > DRY >
FAN > HEAT (only for models with heating). After switching on,
the AUTO mode is set by default. No temperature is displayed
in AUTO mode. In heating mode the start value is 28°C, in the
other modes 25°C.
3
[-]
Press the button to decrease the temperature. Press and
hold the button for 2 seconds to quickly decrease the set
temperature. In AUTO mode, the temperature cannot be set.
4
[+]
Press the button to increase the temperature. Press and
hold the button for 2 seconds to quickly increase the set
temperature. In AUTO mode, the temperature cannot be set.
5
FAN
Press the button several times to select the fan speed in
the following order: AUTO > Low speed > Medium speed >
High speed. In dry mode, the speed cannot be set, the fan
automatically rotates at low speed.
