43
EN
CONTROL PANEL AND BUTTON FUNCTIONS
1
ON/OFF button
Press the button to start and
stop the applianc
4
TIMER button
Press TIMER and then press [+]
or [-] to set the timer. Up to 10
hours, the time is increased in
0.5-hour steps with each press
of the button, above 10 hours
in 1-hour steps. You cannot set
a time from 0.5-24 hours.
2
SWING button
Activates the swing function of
the slats.
3
FAN SPEED
Set the fan speed in the
following order: Low (LOW) >
Medium > (MED) > High (HIGH)
> TURBO.
5
MODE button
Press the button to select the
following modes: COOL > DRY
> FAN > HEAT (for models with
heating) or COOL > DRY > HEAT
(for models without heating).
4
[+] and [-] button
Press the [+] or [-] key to
increase or decrease the
temperature. The temperature
is allowed to be set between
16-30°C.
6
FILTER CHECK
The light turns on when the
appliance has been running for
more than 250 hours. When
the light is on, switch off the
appliance, remove the air filter,
clean it and reinstall it. If the
light is still on, press the button.
