49
EN
5. Attach the ceiling installation frame to the outdoor component using the
fixing screws (see illustration on the previous page). Screw in the fixing screws
by hand so that they do not sit crooked Do not screw in the screws with an
electric screwdriver! Tighten the screws well. The fastening is complete when
the seal is evenly compressed.
6. Pull the fabric channel through the opening of the ceiling installation frame
and cut the four edges of the fabric channel to fit the thickness of the vehicle
ceiling (see top picture on next page).
7. Attach the 4 side parts of the fabric duct by fastening the lower ventilation
plate to the ceiling installation frame with 4 screws (see top picture on the
next page). Cut off the excess fabric that goes beyond the panel.
Frame
Screws
Fabric duct
Lower ventilation
plate
Upper ventilation plate
Fabric duct / fabric
collar
Fit the fabric sleeve to
the upper ventilation
plate.
