A. Use to turn all available channels ON.
B. Use to change Scan Time to QUAD
Audio Vol 10
Scan Time
QUAD
Pair CAM 1 2 3 4
Systern Setup
Factory Reset
Camera 1 ON
Camera 2 ON
Camera 3 ON
Camera 4 ON
C
.
QUAD display as shown. Unavailable channel will be
displayed as blank screen.
To leave QUAD display, simply press
to go
to specific channel.
= CAM4 ; = CAM3; = CAM1; = CAM2
In QUAD display, speaker will be mute and [ZOOM] / [Pair]
button functions are not available
.
11
D. Zoom Indicator shows Zoom status
By pressing (Zoom) on the receiver, you can switch between two resolutions.
Zoom OUT (VGA) Zoom IN (ZOOM, QVGA)
E. Pan / Tilt
In Zoom IN mode (ZOOM), press to pan and tilt camera view.
8
ZOOM
ZOOM
ZOOM
ZOOM
ZOOM
ZOOM
1
1
1
1
1
1
1
This function is available for multi cameras user. Before setting QUAD display, make sure
all cameras are paired to assigned channels. See [Advance Operation – Pair Camera]
section as a guide.
QUAD display will be restored to one camera display every time after your press
for manual scan.
To display properly, turn all available channels ON PRIOR to entering into QUAD mode.
Setting QUAD Display
CH1
CH2
CH3
CH4
