12
Kiwi 106 Menu System
The menu system in the Kiwi-106
Upgrade is complex. This is
unavoidable due to the number of
features and the limited number of
buttons available.
The parameters for editing can mostly
be accessed using the menu system.
Some Parameters are available using
midi control or External Editor only.
Patch parameters are all saved with
the Patch and will be changed
whenever a Patch is loaded. Global
Parameters will remain unchanged on
Patch loads.
The external editor can control all
parameters in any 'Page' or mode the
synth is in and full details can be
found in the Editor User guide.
Page Menus
The 106 has five 'Pages'. This is
necessary to cover all the available
options. The Page is changed by
pressing and holding the MIDICH
button and selecting the Page using
the BANK 1-5 Buttons.
The Page data can optionally display
on Page 1-3 and will always show on
pages 4-5. The digits will scroll the
different items for each page level.
The Group number can be 1-8. The
Bank/Patch number can be 11 to 88
Page 1 - Arp
Page 1 is normal play mode. The digit
display (if enabled) will show 'P1',
current Group number & current
Bank/Patch number and in a 2s loop.
If Display mode is disabled only the
current the Bank/Patch will display.
The current Group will only display
while the Group Button is pressed
while in this mode.
The SAVE, VERIFY & LOAD buttons
will control the Arp. This is detailed in
the Menu flow chart and the Arp
Display Example for Page 1
First Display 'P1'
- Page 1
2nd Display ' G5' - Group 5
3rd Display '24'
- Bank 2/Patch 4
The Group, Bank & Patch numbers
can be 1-8
Page 2 - Sequence
Page 2 is Sequence mode. The digit
display will show 'P2', 'SE' & current
Seq number 1-8 and in a 2s loop if
The Seq number can be 1-8
The SAVE, VERIFY, LOAD and BANK
buttons will control the Seq & Seq
Edit. This is detailed in the Sequence
Display Example for Page 2
First Display 'P2'
- Page 2
2nd Display 'SE' - Sequence
3rd Display ' 1'
- Seq Number 1
Page 3 - Pattern
Page 3 is Pattern mode. The digit
display will show 'P3', 'PA' & current
Pattern number 1-8 and in a 2s loop if
enabled .
The Pattern number can be 1-8
The SAVE, VERIFY, LOAD and
BANK/PATCH buttons will control the
Pattern & Pattern Edit. This is detailed
in the Pattern Section
Display Example for Page 3
First Display 'P3'
- Page 3
2nd Display 'PA'
- Pattern
3rd Display ' 2'
- Pattern Number 2
www.kiwitechnics.com
Kiwi-106 Upgrade User Manual v204
