22
Sequencer
The Juno-106 Upgrade contains a
polyphonic sequencer that has the
capacity of 124 step automatic
playing. Up to 6 notes can be played
at a time so writing a chord is
possible.
The clock for the Sequencer is taken
from the Master Clock and can be
further divided using Global
Parameters Edit. The Seq Clock
Divide parameter is located under
Patch Button 4
Note - If the Master clock source is
set to External Clock or Midi Clock
and no ext/midi clock is present the
sequence will not run.
Note - If the master clock source is
midi or external the sequence will not
begin playing until the first clock is
received
PATCH Buttons
The patch buttons will select the
sequence to play. If a sequence is
selected during sequence play the
currently playing sequence will finish
before the new sequence is loaded.
SAVE Button
This button is used to start or stop
the sequencer playing. Each time
you press this button the sequencer
will start or stop.
LOAD Button
This followed by the seq number
(Patch button 1-8) is used to erase a
sequence. After the Seq number is
selected the erase is done when the
write button is pressed. Press VERIFY
to abort.
www.kiwitechnics.com
Kiwi-106 Upgrade User Manual v204
