— 7 —
Relationship between power source voltage and lifting speed
Rated voltage
(V)
Actual power source
Voltage/Operation voltage (V)
Lifting speed (m/min)
300w 600w
60kg 100kg
180kg
160kg 240kg 480kg
220/220
19.3 11.9 7.3 18.3 12.4 6.1
230
220/230
20.1 12.5 7.7 19.2 12.9 6.4
240/240
21
13
8
20
13.5
6.7
4.4 Special features
(1) Brake
Both dynamic brake and mechanical brake provide high braking capability for the most sure way to stop the
load at the desired positions. The mechanical brake uses non-asbestos material.
(2) Hook and hook latch
Drop-forged heat treated hooks will not fracture but open slowly when over loaded excessively.
Built-in bearing assures easy swiveling of bottom hook. In addition, the hook latch adds another safety.
(3) Friction clutch
This hoist equips with friction clutch mechanism, specially developed by KITO, that causes the motor to
idle when over loaded, thus preventing the load from being lifted. Also, the motor turns idly at the lift and
lower limits to prevent overwinding. The mechanism works also when lifting grounded overloads. It is not
necessary to adjust the friction clutch under normal usage. The friction clutch uses non-asbestos material.
(4) Emergency stop device (option)
This button is used to stop the hoist in an emergency situation. It is a red and mushroom type button. When
pressed, power to the equipment is shut off and the button locks automatically. Turn it to the right to release
the lock and to enable re-start.
