— 2 —
3.2 Safety instructions
3.2.1 Before use
ALWAYS
allow the instructed (trained in safety and operation) people to operate the hoist.
ALWAYS
check the hoist before daily use.
ALWAYS
make sure that the chain length is long enough for the intended job.
ALWAYS
check that the hook latches work properly and replace missing or
broken hook latches.
ALWAYS
check the brake before use.
ALWAYS
use two hoists which each has WLL equal to or more than the load to be lifted whenever you
must use two hoists to lift a load.
ALWAYS
use KITO original load chains marked “KITO”. KIRO shall not be responsible for any claims
or damages arising from the use of other chains.
ALWAYS
check and keep oil to be on the surface of the load chain.
NEVER
use a hoist without a hoist name plate.
NEVER
use modified or deformed hooks.
NEVER
use a hoist in explosive atmosphere.
3.2.2 While operation
ALWAYS
make sure that the load is properly seated in the hook.
ALWAYS
tighten the slack out of the chain and sling when starting a lift to prevent a sudden loading.
ALWAYS
avoid excessive inching operation.
ALWAYS
make sure the hoist motor completely stops before reversing.
ALWAYS
use a hoist within the “Duty rating”, ED%.
ALWAYS
make sure that Proper limit switch actuation ad motor stopping when the hook rises at upper
limit under no load.
ALWAYS
make sure that No deformed, peeled and cracked cushion rubber.
ALWAYS
make sure that No damaged chain spring (option), and minimum free length, 75mm (130mm),
of the chain spring.
Note: Initial free length of the spring 85mm (150mm). ( ): 60-240kg.
WARNING
