KITO EDIII ED06S, Original Instruction

Page: 8 / 44

— 6 —
4.3 Specifications and dimensions
Power supply 230V-50Hz
Type Single speed type Dual speed type Dual speed cylinder type
Model ED06S ED10S ED18S ED16S ED24S ED48S ED06S ED10S ED18S ED16S ED24S ED48S ED06S ED10S ED18S ED16S ED24S
WLL (kg) 60 100 180 160 240 480 60 100 180 160 240 480 60 100 180 160 240
Motor output (W) 300 600 300 600 300 600
Intermittent
duty
% ED 30 20 30 30 20 30 30 20 30
Max. starting frequency
(Time per hour)
180 120 180 180 120 180 180 120 180
Rated Current (A) 230V 3 5 3 5 3 5
Lifting speed (m/min)
High 20.1 12.5 7.7 19.2 12.9 6.7 20.1 12.5 7.7 19.2 12.9 6.7 20.1 12.5 7.7 19.2 12.9
Low - - - - - - 4 3 3 4 3 2 4 3 3 4 3
Standard lift (m) 3 3 1.8
Push button cord length: L (m) 2.5 2.5 -
Load chain diameter (mm) 4 4 4
Net weight (kg) 11.5 15.5
21(21.5)*1
12.0 16.0
21(21.5)*1
14.5 18.5
Min. distance between hooks: C (mm) 315 330 520 315 330 520 945 960
IP (Degree of protection) IP54 IP44
Insulation F
Dimensions (mm)
a 364 428 364 428 364 428
d 187 205 187 205 187 205
e 177 223 177 223 177 223
f 205 219 229 205 219 229 205 219
h 125 135 155 125 135 155 125 135
i 80 84 74 80 84 74 80 84
g 25 24 25 24 25
j 25 24 25 24 25
k 340 362 454 340 362 454 340 362
m 92 149 92 149 92
n 73 104 73 104 73
・ WLL: Indicates maximum mass (working load limit) which a hoist is designed to support in general service.
・ Control: Direct voltage control.
・
The lifting speed is equal to the average value of the lifting/ lowering speed at the rated load capacity. The speed will vary according to the load.
Actual power source voltage should not exceed max. allowable voltage: 264V
The lifting speed varies according to the actual power source voltage as shown in following table.
Single speed type and
Dual speed type Dual speed cylinder type
CAUTION