— 10 —
Assembly procedure:
Attach the chain container to the chain guide
①
with socket bolt
②
and U-nut
③．
Attach the split pin
④
to prevent the U-nut
③
from dropping. Bend pin ends 90° or more.
(3) Assembling push button cord and curled cord
a. Single and dual speed types
While the push button cord is being connected to the hoist body, the strain relief wire may not be
connected yet. After the push button cord connecting, be sure to assemble the end of the strain relief wire
to the hoist body.
Short circuit and electric shock may result if the push button cord is pulled when the strain relief wire is not
connected to the hoist body.
ALWAYS
make sure that the strain relief wire is properly attached to the hoist body as described in the next.
Assembly procedure:
As illustrated, hook the strain relief wire
②
to the cable support L
①
of the hoist body.
b. Dual speed cylinder type
While the curled cord is being connected to the hoist body, it may not be fixed to the chain
container yet. As illustrated, attach it to the chain container so that the clamp of the fastening
belt faces the way it does in the figure and so that the load chain comes to the center of the
curled cord at that time.
CAUTION
Fastening belt clamp
Load chain
Curled cord
Chain container
