KisanKraft
™
SELF PROPELLED REAPER
KK-SPR-1201P / 1202DV / 1203DH
: www.kisankraft.com
: +91.80.22178200
Page 15 of 72
1. Over the conveyor drive
wheel
2. 6203 bearing
3. Flat bearing
4. Drive axle
5. Drive sprocket
6. Under the conveyor drive wheel
7. Conveyor chain
8. Conveyor tension sprocket
9. 6202 bearing
10. Tension wheel strut on the
welding parts
Grain-Lifter:
When the machine is running, the grain lifter and the divider would touch the crop at the
same time. The grain lifter cover could take the fallen crop up, and convey the crop to the
cutting platform, together with the grain lifter star gear and the tine shaped belt. Then the
pressing ring on the grain lifter could press the crop on the baffle so as to avoid any
inclining during the conveying period. The standing pole of the grain lifter is flat, so that the
grain lifter could not push over the crop.
The grain lifter is mainly made up of the standing pole, the tine shaped belt, the star gear,
the nylon-belt wheel, the grain lifter cover and the pressing spring.
Grain Lifter Subassembly
1. Cover
2. Fu Wo Plate
3. Small Pulley
4. Fu WO With
5. Rotary Wo Star Ferry
6. Sub-Wo Stent
7. Regulator Tube Station
8. Spring Under The Pressure
9. Spring Over The Pressure
Handrail Frame Subassembly:
The handrail frame subassembly is the handrail for the movement of the machine. It could
control the left & right turning of the machine, the clutch of the diesel engine and the
accelerator by adjusting the handles. It is mainly made up of the handrail’s fixed side plate,
