KisanKraft
™
SELF PROPELLED REAPER
KK-SPR-1201P / 1202DV / 1203DH
: www.kisankraft.com
: +91.80.22178200
Page 13 of 72
1. Transmission shaft combination
2. Entrusted sprocket
3. Tensioning sprocket
4. Gear box combination
5. Connection frame
6. Clutch cable
7. Tailgate
8. On next conveyor chain
9. Passive guide sprocket
10. Conveyor support Plate
Cutter:
The cutter is installed on the lower part of the cutting platform, which is the main working
part of the machine. Its performance would influence the machine directly. When the
machine is running, the gear case, the eccentric axle pin and the connecting rod would
drive to make the fixed and moving knives moving, so as to cut the crop. It is mainly made
up of the knife pressing riveting, the moving knife riveting, the upper friction lining, hole
ring, axle ring, bearing 1203, connecting-rod bushing and fixed knife riveting.
Cutter Assembly
1. Knife Pressing Device Riveting
2. Moving Knives Riveting
3. Upper Friction Plate
4. Lower Friction Plate
5. Fixed Knives Riveting
6. Cosmotec CT
7. Bearing 1203
8. Block Dust Cover
9. Ring For Hole
10. Connecting Rod Cover
Gear Case:
Gear case is the power transmission part of the machine. It transmits the power from the
gear box to the moving knife of the cutter, the conveying chain and other working parts.
The gear box transmits the power of the gear box not only to the moving knife of the cutter,
but also to the transmission shaft, so as to make the conveying chain work. It is mainly
made up of the gear, a pair of clutches, thrust ball bearing, transmission short shaft, a pair
of bevel gears, power output sprocket, bearing 6204, transmission shaft of gear case,
