Kiramek Vision 1014C, Instruction Manual

Page: 31 / 40

28
VISION 1014C INSTRUCTION MANUAL
PROGRAM FEATURES EXPL AINED
When set to OFF (default), vehicle lights will not illuminate after disarm-
ing.
When set to
ON
, vehicle lights will flash 3 times upon disarming and then
light solid for 30 seconds (or until the Ignition switch is turned on) to illu-
minate the area surrounding the vehicle for greater security.
17 Exterior Illumination
When you turn the Ignition on-and-off 20 times, you can then select one
of two features: (1) Transmitter Learning or (2) Force Reset Code. The
Transmitter Learning feature allows you to add new transmitters to your
system. The Force Reset Code feature allows you to program a unique code
that will allow you to disarm the system even without your transmitter.
The factory default Force Reset Code is “6,” but you should change this as
soon as possible to your own unique code for greater security.
To choose Force Reset Code, you must turn the Ignition on again (for the
21st time), and then leave the Ignition on—
follow steps given on page 29
.
Transmitter Learning is done with the Ignition turned off (no need to turn
it on for the 21st time)— follow steps given on page 31.
20 Transmitter Learning / Force Reset Code