Kiramek Vision 1014C, Instruction Manual

Page: 14 / 40

VISION 1014C INSTRUCTION MANUAL
11
OPTIONAL CONNECTIONS
H2
H2-YEL (–) GWA / Starter Kill Output
“GWA” stands for “Ground When Armed.” This wire supplies (–) 0v ground
(500mA max.) while the 1014 is armed. This output can be used for a variety
of purposes, with the two most popular being Starter Kill Immobilization
(optional 896H-1B relay required) and Door Locking (optional 318-16U door
lock module required)
. When the optional door lock module is connected,
doors will lock when the system is Armed and unlock when Disarmed.
When connecting Starter Kill, the Yellow GWA wire is connected to the Yel-
low wire (“86”) of the optional 896H-1B starter kill relay, as shown in Fig-4
below.
TIP:
You may also attach low-current devices, such as scanning LEDs and
other automotive illumination products, to the YELLOW wire. These de-
vices will turn on when the 1014 is armed. A relay will be needed if your
combined devices (including starter kill relay) exceed 500mA. See
Fig-5
below for example wiring of an optional LED scanner.
OPTIONAL
("
2%,!9
6
)'.)4)/.
37)4#(
A
STARTER
/&&
!##
/.
34
052
CUT
",5
9%, 9%,
FIG-4: Starter Kill Wiring
FIG-5: Connection an Optional Scanner
BLACK
YELLOW
RED