Kiramek Vision 1014C, Instruction Manual

Page: 13 / 40

10
VISION 1014C INSTRUCTION MANUAL
H2-WHT (–) Door Switch Input
OPTIONAL CONNECTIONS
H2
This input detects if a door is opened and is also used for Force Reset — see
page 29 . If a door opens while Armed, the siren will go off for 30 seconds or
until Disarmed. This input can also be connected to the trunk if optional
diodes are used. The connection is made between the door (and/or trunk)
switch and the dome (and/or trunk) light as shown below in
Fig-2
. The
switches shown are open-ciruit (no ground) when the door/trunk is closed.
NOTE:
If you connect the WHITE wire to the trunk, keep in mind that
the siren will go off when the trunk is opened while armed. Disarm the
system before opening the trunk.
!$$å
$)/$%3
425.+å37
$//2å37
$//2å37
7(4
FIG-2: Connecting Door/Trunk Input
$/-%
,)'(4
425.+
,)'(4
"!44%29
This wire supplies a (–) 0v Ground (1.5A max.) output to operate an op-
tional external siren during a security breach. See
Fig-3
below.
H2-ORG (–) Siren Output
3)2%.
FIG-3: Connecting to the Siren
/2'
2%$
",+
"!44%29